Thursday, 19 November 2026

Bellow Seal Valves for Chlorine Service: Understanding Euro Chlor Requirements

Chlorine is both toxic and corrosive, and a stem leak in a chlor-alkali plant is an exposure hazard, not a housekeeping issue. That is why chlorine producers have long written their own valve rules. Euro Chlor, the European federation of chlorine producers, publishes specifications that many chlorine users reference when they buy valves.

Why bellow seal globe valves

Euro Chlor's approved process valve list covers flanged globe valves with a bellow seal and an auxiliary packed gland, in manual, control and remotely operated shut-off versions. The list shows forged or cast steel bodies, a temperature range of −40 °C to +120 °C and sizes from DN 25 to DN 150. Check the current list on the Euro Chlor website, because approvals are updated. A valve that is not on the list is not automatically unsuitable, but the buyer then carries more of the verification work.

The design logic is simple. The bellows is the primary seal. The auxiliary gland is a second line of defence if the bellows is ever breached.

The specifications behind approval

Requirements for globe valves on liquid chlorine sit in GEST 06/318. The approval route follows GEST 86/128, and an independent assessment under GEST 86/129 comes before Euro Chlor considers an application. The process includes design review and prototype testing, and the supplier must re-assess the file after five years. Weld repairs on cast valves for liquid and dry gaseous chlorine have their own specification, GEST 96/220.

Moisture decides the materials

Dry chlorine can be handled in carbon steel. Add moisture and chlorine attacks most common metals, which is why systems are kept dry and why materials differ between wet and dry service. Titanium, for example, resists wet chlorine but is unsuitable for dry chlorine because of ignition risk. For bellows and trim, nickel alloys such as Hastelloy C-276 and Monel 400 are commonly used. Always confirm the material list against the chlorine producer's own specification. Even a small amount of residual moisture left after testing or maintenance can start corrosion, so drying is part of commissioning.

Where these valves sit in a plant

Typical locations include liquid chlorine storage and transfer, tanker loading and dry chlorine gas lines feeding downstream units. These are the places where an exposure incident would be most serious, which is why stem sealing gets so much attention.

Cleaning, lubrication and packaging

Chlorine valves are cleaned and degreased before shipment, because oils and hydrocarbon greases can react with chlorine. Chlorine-compatible lubricants are used, and valves are normally shipped with gaskets and blind flanges fitted so the internals stay clean and dry. Specify cleaning for chlorine service on the purchase order, and keep the end protection on until installation.

Installation care

Remove end protection only when the valve is ready to be fitted, because open ports let humid air in. Use chlorine-compatible gaskets and purge the line dry before first fill. Where the specification calls for it, test with dry air or nitrogen rather than water. Treat the valve as clean equipment from the warehouse to the pipe rack.

A word on throttling

Throttling liquid chlorine needs a conversation with the manufacturer. Plug and bonnet design matter in throttling duty, so state the pressure drop and flow range up front.

What to ask your supplier

  • Euro Chlor approval status, or independent assessment records, for the exact valve type and size
  • A compliance statement against GEST 06/318
  • Material certificates for body, bellows and trim
  • The cleaning and packaging procedure
  • Pressure and leak test reports
  • A fugitive emission type-test report to ISO 15848-1

Freture Techno Pvt. Ltd. offers bellow seal Eurochlor globe valves alongside its standard bellow seal range. Send your service conditions and documentation requirements, and the team will confirm what can be supplied against them. For wider chemical-industry context, read our article on bellows seal globe valves in the chemical and specialty chemical industry.

No comments:

Post a Comment

Bellow Seal Valves for Chlorine Service: Understanding Euro Chlor Requirements

Chlorine is both toxic and corrosive, and a stem leak in a chlor-alkali plant is an exposure hazard, not a housekeeping issue. That is why c...